A three-switch high-voltage converter

A novel single active switch two-diodes high-voltage converter is presented. This converter can operate into a capacitor-diode voltage multiplier, which offers simpler structure and control, higher efficiency, reduced electromagnetic interference (EMI), and size and weight savings compared with traditional switched-mode regulated voltage multipliers. Two significant advantages are the continuous input current and easy isolation extension. The new converter is experimentally verified. Both the steady-state and dynamic theoretical models are correlated well with the experimental dat

UAV Remote Sensing: An Innovative Tool for Detection and Management of Rice Diseases

Unmanned aerial vehicle (UAV) remote sensing is a new alternative to traditional diagnosis and detection of rice diseases by visual symptoms, providing quick, accurate and large coverage disease detection. UAV remote sensing offers an unprecedented spectral, spatial, and temporal resolution that can distinguish diseased plant tissue from healthy tissue based on the characteristics of disease symptoms. Research has been conducted on using RGB sensor, multispectral sensor, and hyperspectral sensor for successful detection and quantification of sheath blight (Rhizoctonia solani), using multispectral sensor to accurately detect narrow brown leaf spot (Cercospora janseana), and using infrared thermal sensor for detecting the occurrence of rice blast (Magnaporthe oryzae). UAV can also be used for aerial application, and UAV spraying has become a new means for control of rice sheath blight and other crop diseases in many countries, especially China and Japan. UAV spraying can operate at low altitudes and various speeds, making it suitable for situations where arial and ground applications are unavailable or infeasible and where precision applications are needed. Along with advances in digitalization and artificial intelligence for precision application across fertilizer, pest and crop management needs, this UAV technology will become a core tool in a farmer’s precision equipment mix in the future

Registration for Optical Multimodal Remote Sensing Images Based on FAST Detection,Window Selection, and Histogram Specification

In recent years, digital frame cameras have been increasingly used for remote sensing applications. However, it is always a challenge to align or register images captured with different cameras or different imaging sensor units. In this research, a novel registration method was proposed. Coarse registration was first applied to approximately align the sensed and reference images. Window selection was then used to reduce the search space and a histogram specification was applied to optimize the grayscale similarity between the images. After comparisons with other commonly-used detectors, the fast corner detector, FAST (Features from Accelerated Segment Test), was selected to extract the feature points. The matching point pairs were then detected between the images, the outliers were eliminated, and geometric transformation was performed. The appropriate window size was searched and set to one-tenth of the image width. The images that were acquired by a two-camera system, a camera with five imaging sensors, and a camera with replaceable filters mounted on a manned aircraft, an unmanned aerial vehicle, and a ground-based platform, respectively, were used to evaluate the performance of the proposed method. The image analysis results showed that, through the appropriate window selection and histogram specification, the number of correctly matched point pairs had increased by 11.30 times, and that the correct matching rate had increased by 36%, compared with the results based on FAST alone. The root mean square error (RMSE) in the x and y directions was generally within 0.5 pixels. In comparison with the binary robust invariant scalable keypoints (BRISK), curvature scale space (CSS), Harris, speed up robust features (SURF), and commercial software ERDAS and ENVI, this method resulted in larger numbers of correct matching pairs and smaller, more consistent RMSE. Furthermore, it was not necessary to choose any tie control points manually before registration. The results from this study indicate that the proposed method can be effective for registering optical multimodal remote sensing images that have been captured with different imaging sensors

Spectroscopy Technology: An Innovative Tool for Diagnosis and Monitoring of Wheat Diseases

Diseases are among the most important factors limiting worldwide production of wheat. Accurate detection of diseases is the key to develop effective management strategies for control of these diseases. Spectroscopy-based technology can be a non-destructive, quick, efficient tool to accurately detect and monitor the occurrence and development of crop diseases. There has seen an increased interest in the research and application of spectrum technology for the diagnosis and detection of wheat diseases in recent years. This book chapter provides a brief review on research advances in using spectroscopy techniques to detect wheat diseases, with a focus on the diagnosis and detection of Fusarium head blight, powdery mildew, and stripe rust, three important fungal diseases in wheat worldwide. Disease symptoms and traditional disease detection methods are also included. Both literature and our original research data are presented, with the section of conclusion and prospects at the end of this book chapter

Rapeseed Seedling Stand Counting and Seeding Performance Evaluation at Two Early Growth Stages Based on Unmanned Aerial Vehicle Imagery

The development of unmanned aerial vehicles (UAVs) and image processing algorithms for field-based phenotyping offers a non-invasive and effective technology to obtain plant growth traits such as canopy cover and plant height in fields. Crop seedling stand count in early growth stages is important not only for determining plant emergence, but also for planning other related agronomic practices. The main objective of this research was to develop practical and rapid remote sensing methods for early growth stage stand counting to evaluate mechanically seeded rapeseed (Brassica napus L.) seedlings. Rapeseed was seeded in a field by three different seeding devices. A digital single-lens reflex camera was installed on an UAV platform to capture ultrahigh resolution RGB images at two growth stages when most rapeseed plants had at least two leaves. Rapeseed plant objects were segmented from images of vegetation indices using typical Otsu thresholding method. After segmentation, shape features such as area, length-width ratio and elliptic fit were extracted from the segmented rapeseed plant objects to establish regression models of seedling stand count. Three row characteristics (the coefficient of variation of row spacing uniformity, the error rate of the row spacing and the coefficient of variation of seedling uniformity) were further calculated for seeding performance evaluation after crop row detection. Results demonstrated that shape features had strong correlations with ground-measured seedling stand count. The regression models achieved R-squared values of 0.845 and 0.867, respectively, for the two growth stages. The mean absolute errors of total stand count were 9.79 and 5.11% for the two respective stages. A single model over these two stages had an R-squared value of 0.846, and the total number of rapeseed plants was also accurately estimated with an average relative error of 6.83%.Moreover, the calculated row characteristics were demonstrated to be useful in recognizing areas of failed germination possibly resulted from skipped or ineffective planting. In summary, this study developed practical UAV-based remote sensing methods and demonstrated the feasibility of using the methods for rapeseed seedling stand counting and mechanical seeding performance evaluation at early growth stages

A seismic prediction method of reservoir brittleness based on mineral composition and pore structure

The Lucaogou Formation, a typical fine-grained mixed formation in the Jimusaer Sag of the Junggar Basin, exhibits considerable potential for hydrocarbon exploration. Accurate brittle prediction is a crucial factor in determining hydraulic fracturing effectiveness. However, the area features complex lithological characteristics, including carbonate rocks, clastic rocks, volcanic rocks, and gypsum interbeds, along with thin layering and sporadic sweet spots. Traditional prediction methods offer limited resolution and there is an urgent need for a seismic brittle prediction method tailored to this complex geological environment. This paper presents a multi-mineral composition equivalent model for complex lithologies that enables the accurate calculation of Vp and Vs These ratios serve as the foundation for pre-stack elastic parameter predictions, which include Poisson’s ratio and Young’s modulus. By comparing the predicted parameters with well-logging measurements, the prediction accuracy is improved to 82%, with particularly high conformity in intervals characterized by high organic matter and clay content. Additionally, a three-dimensional brittle modeling approach reveals that the brittleness of the reservoir exceeds that of the surrounding rock, showing a gradual improvement in brittleness with increasing burial depth from southeast to northwest. The central area exhibits relatively good brittleness, with a stable, blocky distribution pattern